PC free- Easy simple programming!
GSM remote controller has 6 signals Inputs for sensors or switches and 4 relay outputs to control the appliances using SMS or short Call. Also this controller has Intercom option which allows customers communicate by voice channel.
Authorized users then can trigger gate controller outputs, using a short call or text SMS. If user mobile number is recognized in the controller address book, relay is being triggered.
GSM remote controller can be used:
Parking entrance control ,barriers Entrance doors and garage doors
Pumps, valves switching Home heating boiler control
Computer, router, server restarting Holiday home security
Features
· Simple Installation
· Makes phone calls to mobile phones and fixed line telephone numbers
· Easy remote programming by SMS
· Allows up to 250 authorized numbers to "dial the gate" to open at no call cost
· Calls up to 4 numbers in sequence
· Speak to your visitor even when you are not at home
· ADD or DELETE Users remotely by text SMS
· Relay output Timer from 1sec – 9999sec
· Each User can control individually relay output
· Only preprogrammed numbers can get access
· Network Level control
· Work from anywhere in the world
· QUADBAND System 2G
· Waterproof plastic cabinet
· Power 12VDC 0.45A
· Small PCB dimensions allow install controller in to any equipment enclosures
· 2 year manufacturer’s warranty included
Specifications
· Administrators 1
· Users database up to 250
· Power supply 12VDC 50 Hz ~ 200 mA max
· Current consumption in idle state w/o external devices connected up to 50mA
· GSM modem frequency 2G 850/900/1800/1900MHz
· Number of alarm Inputs 6
· Key Input
· Number of outputs 4
· Output type Relay Maximum commuting output values 24V 50Hz ~ 0,5A / 24V 1A
· Dimensions 65×110×20 mm
· Operating temperature range -20…+55 °C
Simple Installation and setup without PC
GSM Mini controller model: GSM x31-3L1 with 3 relay outputs to control the appliances using SMS or short Call. If user mobile number is recognized in, the controller address book relay is being triggered.
End-users are able to control externally connected devices via mobile phonesFREE of CHARGE!
FEATURES
Mini GSM controller can be used:
Easy simple installation and programming!
This Plug and play GPRS communicator x31-2BL has been developed, through a growing demand to transmit alarm panels Ademco Contact ID protocols to the monitoring stations (CMS) IP receivers by GPRS/GSM network in the event of PSTN line loss or failure.
GSM/GPRS x31-2BL communicator is compatible with control panels from any manufacturer which has PSTN telephone communicator and work with Ademco Contact ID protocol
WIRING DIAGRAM
Power Supply
12V 1A
Current Used in Standby Mode
44mA
Current Used in transmitting mode
120MA
GSM Modem Frequency
Quad-Band GSM/GPRS/ 850/900/1800/1900MHz
Communications
Voice Calls, SMS, GPRS
Supported Protocols
Ademco Contact ID, SIA IP, SIA IP encrypted, Enigma2
Administrator number
1
ALARM (Panic Button) Input type
NC (normally closed)
TAMPER Input type
GSM Fault (FLT) Output type
Allowable Input Values
0-12V 0.1-0.3mA
Generated Phone Line Voltage(Tone)
0.7VDC
Dial Tone Frequency
425Hz
Phone Line Active resistance
150 Ω
Phone line Reactive resistance
600 Ω
Operating temperature range
-20..+55o C
GPRS communicator PSB dimensions
140 x 57 x 20mm
PCB weight
120g
IP44 plastic enclosure with 12V1A power supply (no GSM controller pcb)
